Ruby Tech GS-2124C Manuel d'utilisateur télécharger pdf (Page 57)

GS-2124C User Manual

Publication date: June, 2005

Revision A1

3-2-2. Port Configuration

Port Configuration is applied to change the setting of each port. In this

configuration function, you can set/reset the following functions. All of them are

described in detail below.

Fig. 3-10

Function name:

Port Configuration

Function description:

It is used to set each port’s operation mode. The switch supports 3 parameters

for each port. They are state, mode and flow control.

Parameter description:

State:

Set the communication capability of the port is Enabled or Disabled.

When enabled, traffic can be transmitted and received via this port.

When disabled, the port is blocked and no traffic can be transferred

through this port. Port State is configurable by the user. There are only

two states “Enable” and “Disable” able to choose. If you set a port’s state

“Disable”, then that port is prohibited to pass any traffic, even it looks

Link up.

Default: Enable.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 266 267

Pas de commentaire

Ruby Tech GS-2124C Manuel d'utilisateur Page 57